Sie bieten auf ein 100 MHZ-1GHZ Frequenztester Frequenzmesser Fernbedienung Handsender Kopiergerät
zum Erkennen und kopieren von allen Arten der RF drahtlosen Fernbedienungen.Es wurde maßgeschneidert für Schlosser, Schlüsselhersteller, sowie Kundendienste im Bereich elektrischer Türen und Autos.
Eigenschaften:
- Gerät kopiert Fixcode, Lerncode und Teil des Rollencode Handsender
Test Entfernung: im Umkreis von 10 cm
Frequenzbereich: 100MHz-1GHz
TesterRF Wireless Transmitter Frequenzzähler FrequenzzählerWireless Funk-Fernbedienung
Frequenzmesser kann verschiedenen Fernbedienungen zu testen.
Mit einem Tastendruck kann man sofort Feststellen auf welcher Frequenz der Sender sendet.Benutzerhandbuch:
Die Bedienung ist einfach, gerade Plug-in der Stromversorgung, schalten Sie den Netzschalter,
legen Sie Fernbedienung auf der Empfängerteil des Zählers, und drücken Sie eine beliebige Taste auf der Fernbedienung, die Steuerfrequenz wird auf dem Display gezeigt.
Technische Daten:
- Kopiergerät
- Netzteil
- Keramik Stift
- 2 Verbindungskabel
- englische Anleitung
Das Set beinhaltet:
- 1 x Frequenz Zähler
- Anleitung Zt. in englisch
.jpg)
.jpg)
Sämtliche Daten, Texte und Bilder stehen im Eigentum der Silver Verkaufsagentur.
Jedes Kopieren von Bildern, Übernehmen jeglicher Textpassagen werden rechtlich geahndet.
© 2017 design & code by blockster / mellow-arts
Digital Counter Remote Master issuitable for the remote control and the match of anti-theft annunciator,decoding, debugging and check. (Including Auto theftproof implement, wirelesstheftproof implement, garage door remote control, and electric control doorremote control.
Digital Counter Remote Master can be used to copy each factory brand's remotecontrol swiftly; including fix code, computer code, and part of roll code.
Digital Counter Remote Master is easy to operate according to the introductionin using manual.
Functions
Chinese-English transition menu
frequency display
remote control copy
remote control regenerate
line inter-transfer and upgrade and so on.
Package
1pc x Digital Counter
2pc x Red Wires
1pc x Screw Stick
1pc x AC Adapter
Attention:No keys included in the package!
Change Chinese to English
turn on power button and press"5" button two times, it shows "1 remote copy";
Press "3" button four time, it shows" 5 system setup"
Press "5" button one time, it shows" 1 language setup"
Press"5" button one time, it shows" 2 chinese"
Press" 3" button one time, you will see " 1 english"
Press"5" button one time, it displays" 1 set language"
turn off power and then turn on to finish english language setting.
User Manual(Operate Instruction)
The remote master is used to copy RC, working with remote control A, B, C threestyles submachines.
1. Four copy styles as below
Turn on the power, press key5 2 times, interface shows "remot copy";
1) press key5 one time, shows "1.normal copy";
2) then press key3 one time, shows "2.Singkey copy";
3) continue to press key3 one time, shows "3.MulFreq copy";
4) repeat last step, shows "4.same SYS copy";
2. "Normal Copy"
When the interface shows "1.normal copy", then action as below
1) press key5 one time, shows "input 1key to", then press the original remote1key one time, the machine sounds "bee" a time,
enter into code reading; then press key5 one time, shows "input 2key to",continue last step.
Action as this to read all keys one by one;
2) When finished original remote code reading, press key5 two times, shows"input No.1 remote", means insert RC
(remote control) A, press key5 one time, then write the code infomation into newremote;
3) adjust frequency: back to interface "remot copy", press key4 one time to testfrequency: put the original
remote on the machine and press any key one time, shows the frequency. Then putthe RC A on the machine,
press key1 one time, use the non-inductive regulator action on the whitecapacitance to adjust frequency fit.
4) after adjust frequency, press key1 & key 2 at the same time (if the remotehas 5keys, just need press
key5 one time), the light flash one time. When you press any key there is thelight, means copy successfully finished.
3. Other copy method, please action as the indication in the machine.
A Brief Duplicator User's Guide
A. NORMAL COPY
1.please sturn on the power and press the 5th key once------remote copy
2.press the 1st key once----------input 1 key
3.begin to input the client's 1st key(press the key until the frequencydisplayed )------- ISN data
4.press the 5th key once-------input 1 key again
5.input the client's1st key again--------ISN data
6.press the 5th key once------input 2 key
7.input the client's 2nd key------ISN data
8.press the 5th key once--------input 3 key
9.input the client's 3rd key------ISN data
10.The rest deduced, having finished the inputing process, press the 5th keytwicees -----use
NO.''x'' remote
11.having inserted No.''x'' remote, press the 5th key twice------write ok
12.pull out the remote, press the duplicator 4th key---------FREQ MHz
13.put the copied remote on the duplicator, press any key once-----appearingfrequency
14.put the new remote on the duplicator, use ceramic aligner tool to turn round
white capacitance until the digtal reach the copied remote
15.having finished the adjustment, press the 1st and 2rd once at the same time .
the light flash once, then press any key, the light -light-, over
B. SINGKEY single COPY
1.turn on the power, press the 5th key twice-----normal copy
2.press the 3rd once-------singkey copy
3.press the 5th once------input 1 key
4.input the 1st key once------input 1key 003
5.input the 1st key the 2nd time ------input 1key 013
6.input the 1st key the 3rd time-------input 1key 023
7.go on inputing until--------input 2key 013
8.input the 2nd key once-----input 2key 023
9.all key inputted, press the duplicator 5th key twice-----use no''x''remote
10.the other steps like the ''normal copy'' C. Reread/recopy(SCP)
C. this function is used to recopy the having copied remote
1.turn on the power, press the 5th key once ------remote copy
2.press the 2nd key once------inline remote
3.insert the client's having copied remote, press the 5th key once-----write toremot
4.pull out the client's remote, press the 5th key once------input NO.''X''remote
5.insert the new blank No''x'' remote, press the 5th key twice-----write ok
6.pull out the new remote, begin to adjust the frequency, like the ''normalcopy''
7.press the 1st and 2nd key of the new remote at the same time, then press
any key
the light light, ok, over.
D. No.3 remote copy(rolling code series)
1. turn on the power, input all key of the client's remote,like the ''normalcopy''
2. Notice: some of the client's remotes are two key, even one key, you mustinput five key(any key is ok)
3. after you finish inputing, press the 5th key twice, the duplicator begin toscan, if the decode scaning is succcessful--------
-completely copy; if failed, the scaning can't be stopped, or the duplicator
displayes--------input 1key
4. if display(completely copy), press the 5th key twice-----input No.3 remote
5. insert the new blank remote(No.3), press the 4th key(+1), then press the 5thkey ------write ok
6.pull out the new copiedremote, begin to adjust the frequency, like the''normal copy''
7.if the new coplied remote is 5 keyes, please press it's 5th key; if the remote5 keyes, press the 1st and 2nd
key once at the same time, then press any key, the light
lights. end
Notice: Please intercopy with the client's old remote, or it can't be used
